Navigation
- index
- modules |
- next |
- previous |
- Python »
- 3.4.2rc1 Documentation »
- The Python Standard Library »
- 18. Interprocess Communication and Networking »
This module provides mechanisms to use signal handlers in Python.
The signal.signal() function allows to define custom handlers to be executed when a signal is received. A small number of default handlers are installed: SIGPIPE is ignored (so write errors on pipes and sockets can be reported as ordinary Python exceptions) and SIGINT is translated into a KeyboardInterrupt exception.
A handler for a particular signal, once set, remains installed until it is explicitly reset (Python emulates the BSD style interface regardless of the underlying implementation), with the exception of the handler for SIGCHLD, which follows the underlying implementation.
There is no way to “block” signals temporarily from critical sections (since this is not supported by all Unix flavors).
A Python signal handler does not get executed inside the low-level (C) signal handler. Instead, the low-level signal handler sets a flag which tells the virtual machine to execute the corresponding Python signal handler at a later point(for example at the next bytecode instruction). This has consequences:
Python signal handlers are always executed in the main Python thread, even if the signal was received in another thread. This means that signals can’t be used as a means of inter-thread communication. You can use the synchronization primitives from the threading module instead.
Besides, only the main thread is allowed to set a new signal handler.
The variables defined in the signal module are:
This is one of two standard signal handling options; it will simply perform the default function for the signal. For example, on most systems the default action for SIGQUIT is to dump core and exit, while the default action for SIGCHLD is to simply ignore it.
This is another standard signal handler, which will simply ignore the given signal.
All the signal numbers are defined symbolically. For example, the hangup signal is defined as signal.SIGHUP; the variable names are identical to the names used in C programs, as found in <signal.h>. The Unix man page for ‘signal()‘ lists the existing signals (on some systems this is signal(2), on others the list is in signal(7)). Note that not all systems define the same set of signal names; only those names defined by the system are defined by this module.
The signal corresponding to the CTRL+C keystroke event. This signal can only be used with os.kill().
Availability: Windows.
New in version 3.2.
The signal corresponding to the CTRL+BREAK keystroke event. This signal can only be used with os.kill().
Availability: Windows.
New in version 3.2.
One more than the number of the highest signal number.
Decrements interval timer in real time, and delivers SIGALRM upon expiration.
Decrements interval timer only when the process is executing, and delivers SIGVTALRM upon expiration.
Decrements interval timer both when the process executes and when the system is executing on behalf of the process. Coupled with ITIMER_VIRTUAL, this timer is usually used to profile the time spent by the application in user and kernel space. SIGPROF is delivered upon expiration.
A possible value for the how parameter to pthread_sigmask() indicating that signals are to be blocked.
New in version 3.3.
A possible value for the how parameter to pthread_sigmask() indicating that signals are to be unblocked.
New in version 3.3.
A possible value for the how parameter to pthread_sigmask() indicating that the signal mask is to be replaced.
New in version 3.3.
The signal module defines one exception:
Raised to signal an error from the underlying setitimer() or getitimer() implementation. Expect this error if an invalid interval timer or a negative time is passed to setitimer(). This error is a subtype of OSError.
The signal module defines the following functions:
If time is non-zero, this function requests that a SIGALRM signal be sent to the process in time seconds. Any previously scheduled alarm is canceled (only one alarm can be scheduled at any time). The returned value is then the number of seconds before any previously set alarm was to have been delivered. If time is zero, no alarm is scheduled, and any scheduled alarm is canceled. If the return value is zero, no alarm is currently scheduled. (See the Unix man page alarm(2).) Availability: Unix.
Return the current signal handler for the signal signalnum. The returned value may be a callable Python object, or one of the special values signal.SIG_IGN, signal.SIG_DFL or None. Here, signal.SIG_IGN means that the signal was previously ignored, signal.SIG_DFL means that the default way of handling the signal was previously in use, and None means that the previous signal handler was not installed from Python.
Cause the process to sleep until a signal is received; the appropriate handler will then be called. Returns nothing. Not on Windows. (See the Unix man page signal(2).)
See also sigwait(), sigwaitinfo(), sigtimedwait() and sigpending().
Send the signal signum to the thread thread_id, another thread in the same process as the caller. The target thread can be executing any code (Python or not). However, if the target thread is executing the Python interpreter, the Python signal handlers will be executed by the main thread. Therefore, the only point of sending a signal to a particular Python thread would be to force a running system call to fail with InterruptedError.
Use threading.get_ident() or the ident attribute of threading.Thread objects to get a suitable value for thread_id.
If signum is 0, then no signal is sent, but error checking is still performed; this can be used to check if the target thread is still running.
Availability: Unix (see the man page pthread_kill(3) for further information).
See also os.kill().
New in version 3.3.
Fetch and/or change the signal mask of the calling thread. The signal mask is the set of signals whose delivery is currently blocked for the caller. Return the old signal mask as a set of signals.
The behavior of the call is dependent on the value of how, as follows.
mask is a set of signal numbers (e.g. {signal.SIGINT, signal.SIGTERM}). Use range(1, signal.NSIG) for a full mask including all signals.
For example, signal.pthread_sigmask(signal.SIG_BLOCK, []) reads the signal mask of the calling thread.
Availability: Unix. See the man page sigprocmask(3) and pthread_sigmask(3) for further information.
See also pause(), sigpending() and sigwait().
New in version 3.3.
Sets given interval timer (one of signal.ITIMER_REAL, signal.ITIMER_VIRTUAL or signal.ITIMER_PROF) specified by which to fire after seconds (float is accepted, different from alarm()) and after that every interval seconds. The interval timer specified by which can be cleared by setting seconds to zero.
When an interval timer fires, a signal is sent to the process. The signal sent is dependent on the timer being used; signal.ITIMER_REAL will deliver SIGALRM, signal.ITIMER_VIRTUAL sends SIGVTALRM, and signal.ITIMER_PROF will deliver SIGPROF.
The old values are returned as a tuple: (delay, interval).
Attempting to pass an invalid interval timer will cause an ItimerError. Availability: Unix.
Returns current value of a given interval timer specified by which. Availability: Unix.
Set the wakeup file descriptor to fd. When a signal is received, the signal number is written as a single byte into the fd. This can be used by a library to wakeup a poll or select call, allowing the signal to be fully processed.
The old wakeup fd is returned. fd must be non-blocking. It is up to the library to remove any bytes before calling poll or select again.
Use for example struct.unpack('%uB' % len(data), data) to decode the signal numbers list.
When threads are enabled, this function can only be called from the main thread; attempting to call it from other threads will cause a ValueError exception to be raised.
Change system call restart behaviour: if flag is False, system calls will be restarted when interrupted by signal signalnum, otherwise system calls will be interrupted. Returns nothing. Availability: Unix (see the man page siginterrupt(3) for further information).
Note that installing a signal handler with signal() will reset the restart behaviour to interruptible by implicitly calling siginterrupt() with a true flag value for the given signal.
Set the handler for signal signalnum to the function handler. handler can be a callable Python object taking two arguments (see below), or one of the special values signal.SIG_IGN or signal.SIG_DFL. The previous signal handler will be returned (see the description of getsignal() above). (See the Unix man page signal(2).)
When threads are enabled, this function can only be called from the main thread; attempting to call it from other threads will cause a ValueError exception to be raised.
The handler is called with two arguments: the signal number and the current stack frame (None or a frame object; for a description of frame objects, see the description in the type hierarchy or see the attribute descriptions in the inspect module).
On Windows, signal() can only be called with SIGABRT, SIGFPE, SIGILL, SIGINT, SIGSEGV, or SIGTERM. A ValueError will be raised in any other case.
Examine the set of signals that are pending for delivery to the calling thread (i.e., the signals which have been raised while blocked). Return the set of the pending signals.
Availability: Unix (see the man page sigpending(2) for further information).
See also pause(), pthread_sigmask() and sigwait().
New in version 3.3.
Suspend execution of the calling thread until the delivery of one of the signals specified in the signal set sigset. The function accepts the signal (removes it from the pending list of signals), and returns the signal number.
Availability: Unix (see the man page sigwait(3) for further information).
See also pause(), pthread_sigmask(), sigpending(), sigwaitinfo() and sigtimedwait().
New in version 3.3.
Suspend execution of the calling thread until the delivery of one of the signals specified in the signal set sigset. The function accepts the signal and removes it from the pending list of signals. If one of the signals in sigset is already pending for the calling thread, the function will return immediately with information about that signal. The signal handler is not called for the delivered signal. The function raises an InterruptedError if it is interrupted by a signal that is not in sigset.
The return value is an object representing the data contained in the siginfo_t structure, namely: si_signo, si_code, si_errno, si_pid, si_uid, si_status, si_band.
Availability: Unix (see the man page sigwaitinfo(2) for further information).
See also pause(), sigwait() and sigtimedwait().
New in version 3.3.
Like sigwaitinfo(), but takes an additional timeout argument specifying a timeout. If timeout is specified as 0, a poll is performed. Returns None if a timeout occurs.
Availability: Unix (see the man page sigtimedwait(2) for further information).
See also pause(), sigwait() and sigwaitinfo().
New in version 3.3.
Here is a minimal example program. It uses the alarm() function to limit the time spent waiting to open a file; this is useful if the file is for a serial device that may not be turned on, which would normally cause the os.open() to hang indefinitely. The solution is to set a 5-second alarm before opening the file; if the operation takes too long, the alarm signal will be sent, and the handler raises an exception.
import signal, os
def handler(signum, frame):
print('Signal handler called with signal', signum)
raise OSError("Couldn't open device!")
# Set the signal handler and a 5-second alarm
signal.signal(signal.SIGALRM, handler)
signal.alarm(5)
# This open() may hang indefinitely
fd = os.open('/dev/ttyS0', os.O_RDWR)
signal.alarm(0) # Disable the alarm